FabCure 2

FabCure 2 is recommended as the standard post-curing tool for 3D printers from Shining3D. With FabCure 2, each resin cure profile is finely tuned to bring the part to its peak performance through precise heat and light. FabCure 2 precisely defines the post-processing steps of the printed object to ensure high precision and optimal material performance, while automating the process.

From the sides and bottom, 30 multi-directional LEDs emit powerful UV light that instantly penetrates deep into the surface of the part, completely curing the printed object within a few minutes. With a power of 70W, these LEDs provide a high power curing cycle, ensuring an efficient curing process.

The ceramic heating module is integrated with multiple temperature sensors. The chamber heats up quickly to 60 degrees, contributing to the enhancement of mechanical and flexural properties.The FabCure 2 heating system precisely controls ambient temperatures to 60 ℃.

FabCure 2 provides optimal curing parameters for Shining3D resins, which can be updated via the wireless network. Customized curing parameter settings are supported.

Curing volume up to Φ210mm and H180mm supports a wide range of dental appliances.

With the most up-to-date cloud-based smart material library, the FabCure 2 is always synchronized. The FabCure 2 is equipped with Wi-Fi which enables over-the-air updates to deploy the latest firmware and configurations. Your device learns from our process engineering experts all the time.

The convenient control knob has an integrated LED screen enabling an interactive and convenient operation experience.

• High Power Multi-surface Light Curing
• Rapid Chamber Heating
• Customized Curing Parameter
• Larger Curing Volume
• Smart Material Library
• Easy Operation with OLED Screen
  
  
  

Brochure